Introduction
If you’ve recently installed or are troubleshooting your Reliabilt (RB) Electronic Keypad Deadbolt, this detailed guide will walk you through all the necessary programming steps. Whether you want to set up a new lock, reprogram an existing one, or reset the device to factory settings, this resource provides clear, step-by-step instructions to help you achieve your goal efficiently.
For visual learners, I recommend watching my detailed video tutorial on how to program the Reliabilt Electronic Deadbolt:
Table of Contents
Restoring Factory Default Settings
Whether you have a brand-new or pre-owned RB Electronic Deadbolt, performing a factory reset is a fundamental first step. This process wipes all previously stored codes—including any hidden or user-defined ones—and restores the lock to its original factory configuration. This setup allows you to customize the lock anew, ensuring enhanced security and optimal performance.
Follow these steps to reset your lock:
- Access the interior module of the lock by removing the battery cover—simply slide it upward to detach.
- Locate the reset pinhole labeled R beneath the battery compartment. This is the reset button.
- Using a small tool like a paperclip or pin, insert it into the reset hole and hold down until you hear three distinct long beeps, indicating the reset process is complete.
Door Handing Identification Process
After resetting, it’s crucial to perform the door handing identification to ensure proper operation. This process helps the lock recognize whether the door is left- or right-handed, which influences how the latch extends and retracts for seamless locking and unlocking.
To perform door handing identification:
- On the exterior keypad, input the default Programming Code 0000, then press the button marked with the Unlock & Lock icons.
- Press 0 followed by the Unlock & Lock button.
- The latch bolt will automatically extend and then retract to determine the door’s orientation. Once this process completes, the door handing is correctly configured.
Changing the Default or Existing Programming Code
The default Programming Code for your lock is 0000. For security reasons, it’s highly recommended to change this code immediately after installation or reset. The Programming Code is essential for accessing various configuration settings, including adding or removing user codes.
Here’s how to update your Programming Code:
- Enter the current Programming Code (default or your existing one) on the keypad, then press the Unlock & Lock icon.
- Press 4 followed by the Unlock & Lock button.
- Input your new desired code (between 4 and 10 digits), then press the Unlock & Lock icon again.
- Upon successful change, you will see a green flash accompanied by two beeps, confirming the new code is active. This new code will now be required for further programming or security modifications.
Note: This procedure can also be used to modify your existing Programming Code, not just the default setting.
Removing the Default User Code
Your lock initially comes with a default User Code 1234, which grants immediate access but poses a security risk if left unchanged. To enhance security, you should delete this default code and replace it with your personalized codes.
To delete the default User Code:
- Input your current Programming Code, then press the Unlock & Lock icon.
- Press 2 followed by the Unlock & Lock button.
- Enter the default User Code 1234, then press the Unlock & Lock icon.
- A green flash and two beeps will confirm the code removal.
Note: You can use this method to delete any individual User Codes you’ve previously added to the system.
Adding New User Codes
To enable authorized users to unlock the door electronically, you need to program new User Codes. These can range from 4 to 10 digits and are vital for shared access management.
Follow these steps to add a new User Code:
- Enter your current Programming Code, then press the Unlock & Lock icon.
- Press 1 followed by the Unlock & Lock button.
- Type in your preferred User Code (4-10 digits), then press the Unlock & Lock icon.
- The lock will flash green and emit two beeps, indicating successful addition.
This process can be repeated to add up to 10 different User Codes, allowing multiple authorized users access without sharing a master code.
Removing All User Codes Simultaneously
In scenarios where you need to clear all user access codes—for example, after a change of occupancy—you can do so swiftly. This resets the system to only accept physical key entry, so you’ll need to reprogram User Codes as needed.
To delete all User Codes at once:
- Input your current Programming Code, then press the Unlock & Lock icon.
- Press 3 followed by the Unlock & Lock button.
- The lock will flash green and beep twice, confirming all user codes have been erased.
Activating and Customizing the Auto-Lock Feature
The Auto-Lock feature is designed to automatically relock your door after a preset period, defaulting to 30 seconds for convenience and security. You can enable this feature and set your preferred delay time for automatic locking.
To turn on Auto-Lock:
- Enter your current Programming Code, then press the Unlock & Lock icon.
- Press 5 followed by the Unlock & Lock button.
- A green flash and two beeps will confirm activation.
To customize the delay time (between 10 and 99 seconds):
- Input your Programming Code, then press the Unlock & Lock icon.
- Press 6 followed by the Unlock & Lock button.
- Enter your desired delay time in seconds, then press the Unlock & Lock icon.
Final Notes and Additional Resources
For further assistance, you might find it helpful to review related articles such as How to Program Defiant Electronic Deadbolt and How to Program Tru-Bolt Electronic Deadbolt. These resources complement the programming procedures outlined here and can be useful if you own different lock models.
Conclusion
This comprehensive guide provides all the necessary steps to program, reset, and manage your Reliabilt Electronic Keypad Deadbolt effectively. Even without the original user manual, following these instructions will ensure your lock functions securely and efficiently. For visual guidance, watch my accompanying video, and don’t hesitate to reach out with questions—I’m here to help you achieve optimal security for your home or office.
Leave a Reply